Skip to content Skip to main navigation Skip to footer

How to build a pentest robot?

From the Automation tab – select Robots. Click on the “create robot” button to open the design studio.

You can choose the tool blocks from the left menu and connect them according to your desired testing flow.
You can also add logic blocks in the flow to trigger the next tool only if certain conditions are met.

Select tools & Logical conditions to create your custom testing flow

Currently, you can use the following tools to build pentest robots:

Each scanner has its own set of conditions that will apply to the scan result.

Drag and drop the blocks on the design page to add them to the flow. The blocks will snap in place when releasing them.

drag and drop blocks to create a pentest robot

Click on each block to configure the scan settings or change the conditions.

drag and drop blocks to create a pentest robot. chose from tools, logic and conditions

Name your robot and add an optional description.

The robots will be available in the “Scan with Robot” menu from targets.

Start scan with pentest robot

See next: How to edit your pentest robot.

Was This Article Helpful?

Related Articles

If you didn't find what you were looking for, browse the categories below or contact us now!

We'd really love to get you the answer you're looking for. If the article How to build a pentest robot? doesn't contain the information you're seeking, please get in touch with us directly:

Contact us »